Yadda Ake Zaɓa Tsakanin Jerin 20/30/35: Kammalawa Uku Masu Mahimmanci
Faɗin ramin yana ƙayyade tsarin kayan haɗi:Ba za a iya musanya ramukan 6mm, 8mm da 10mm ba — da zarar an saita faɗin ramin, za a kulle cikakkun bayanai na T-nuts da maƙallan kusurwa.
Sashe-sashe da lokacin inertia suna ƙayyade ƙarfin kaya:Mafi girman ɓangaren giciye da kuma girman lokacin haɗakar inertia (Ix/Iy), ƙarfin juriyar lanƙwasawa yana ƙaruwa.
Aikace-aikacen yana saita wurin farawa:Rufewar haske yana buƙatar jerin 20, firam ɗin da aka saba amfani da su don jerin 30, da kuma tsarin da ke ɗauke da nauyi mai yawa don jerin 35.
Tsarin Faɗin Ramin: 6mm / 8mm / 10mm da Daidaitawar Kayan Haɗi
Faɗin rami shine wurin shiga lokacin zaɓar tsarin fitar da aluminum.Ramin 6mmgalibi ana amfani da shi a cikin haɗa firam ɗin da ba su da nauyi;Ramin 8mmshine matakin gabaɗaya, tare da ƙayyadaddun ƙayyadaddun kayan ɗaurewa na matsakaicin zango da ƙarfin kaya;Ramin 10mmyana cikin matakin aiki mai nauyi, wanda ake amfani da shi don haɗa firam ɗin tsari wanda ke fuskantar matsin lamba mai yawa, ƙarfi mai yawa da nauyi mai yawa. Da zarar an daidaita faɗin ramin, ana kulle ƙusoshin T, goro da maƙallan kusurwa masu dacewa - ya kamata a sayi bayanan martaba da kayan haɗi a faɗin ramin iri ɗaya da tsarin iri ɗaya.
Bayani dalla-dalla na Jerin 20/30/35
An ɗauko bayanan da ke ƙasa daga katalogin e-katal na Chengdu E&I Aluminum:
| Samfuri | Nauyi | Amfani na yau da kullun |
|---|---|---|
| E&I-6-2020 | 0.65 kg/m | Firam ɗin haske, ƙananan kabad |
| E&I-6-2035 | 1.267 kg/m | Maƙallan haske tare da bangarori |
| E&I-8-3030 | 1.05 kg/m | Tsarin kayan aiki na yau da kullun |
| E&I-6-3030LA | 1.087 kg/m | Rarraba haske da kariya |
| E&I-8-3040 | 1.55 kg/m | Firam ɗin da ke ƙarƙashin manyan kaya |
| E&I-8-3060 / E&I-8-3090 | 2.0 / 2.71 kg/m | Tsaye, manyan sanduna |
| E&I-8-30120 / E&I-8-30150 | 3.899 / 8.6 kg/m | Tsarin dogon zango, mai nauyi mai nauyi |
| E&I-10-3535 | 1.55 kg/m | Tallafi masu ƙarfi da damuwa mai yawa |
| E&I-8-3570 | 2.657 kg/m | Gilashi masu nauyi da kuma tsaye |
| E&I-10-3580 | 1.997 kg/m | Babban katako na firam masu nauyi |
Kammalawa da Tsarin Sama: 6063-T5 da Anodizing
6063-T5wani abu ne da aka saba amfani da shi wajen dumama kayan fitarwa na aluminum na masana'antu, yana daidaita ƙarfin fitarwa da ƙarfi, kuma ya dace da tsarin nau'in firam; ana iya la'akari da 6082-T5 don aikace-aikacen nauyi ko matsanancin damuwa. Don kammala saman, ana amfani da bayanan martaba.anodizeddon samar da wani kauri mai kauri na oxide wanda ke inganta juriya ga tsatsa. Kammalawar tana da launin satin-silver-white kuma ana iya canza launinta zuwa wani takamaiman inuwa, wanda hakan ya sa ta dace da yanayin danshi, ƙura da waje.
Matakan Zaɓe: Kulle Takamaiman Bayani a Matakai Uku
Bayanin Mai Bayarwa
Kamfanin Chengdu E&I Aluminum Industry Co., Ltd.Ya shiga fannin fitar da aluminum a masana'antar a shekarar 2011 kuma ya shafe shekaru 15 yana aiki a masana'antar. Masana'antarsa ta mamaye sama da murabba'in mita 3,000, kuma karfin sarrafa ta na shekara-shekara ya wuce tan 1,000 na fitar da aluminum a masana'antar.
Kamfanin yana ba da ayyukan ƙira, sarrafawa da haɗa abubuwa na tsayawa ɗaya, kuma yana iya kammala lissafin zaɓi, yankewa da haɗa firam daga zane-zanen abokan ciniki. Ya yi wa kamfanoni hidima kamar suChanghong, BOE, HKC da Haier.
Tambayoyin da ake yawan yi akai-akai
Q1: Waɗanne aikace-aikace ne extrusion na aluminum jerin 20 ya dace da su?
A: Jerin 20 yana amfani da rami mai girman mm 6 tare da nauyin 0.65 ~ 1.267 kg/m, yana sanya shi a cikin matakin aiki mai sauƙi. Ya dace da maƙallan kayan aiki, maƙallan kayan aiki da kariya ta kariya.
T2: Jerin 30 yana zuwa a cikin nau'ikan ramummuka na 6mm da 8mm. Ta yaya zan zaɓa?
A: Zaɓi bisa ga tsarin kayan haɗi da matakin kaya: Ana amfani da samfuran ramin 6mm galibi don sassaka masu haske, yayin da samfuran ramin 8mm ake amfani da su don firam ɗin kayan aiki na yau da kullun.
T3: Yaushe zan zaɓi jerin 35?
A: Don aikace-aikacen da ke da matuƙar damuwa, na dogon lokaci kamar na'urorin robot masu tsayi da dandamali masu ɗaukar nauyi da yawa, ana ba da shawarar jerin 35.
Q4: Menene tsawon daidaitattun bayanan martaba, kuma za a iya yanke su zuwa girmansu?
A: Tsawon da aka saba dashi shine mita 6.02. Ana iya yanke bayanan martaba kuma a haƙa su zuwa zane-zanen abokin ciniki, kuma ana iya samun ƙira, sarrafawa da isar da kayan aiki na tsayawa ɗaya.
T5: Me anodizing ke yi?
A: Anodizing yana samar da wani kauri mai kauri na oxide a saman bayanin martaba, yana inganta juriyar tsatsa da juriyar lalacewa. Kammalawar an yi ta da satin-silver-white.
T6: Za a iya raba kayan haɗi tsakanin bayanan GB da na Turai na yau da kullun?
A: Ba a ba da shawarar ba. Tsarin biyu sun bambanta a girman ramin da ƙayyadaddun kayan haɗi, don haka aiki ɗaya ya kamata ya yi amfani da tsarin ramin guda ɗaya da faɗin rami ɗaya.
Lokacin Saƙo: Oktoba-13-2026